职业与健康 ›› 2025, Vol. 41 ›› Issue (10): 1351-1355.

• 论著 • 上一篇    下一篇

生活饮用水中氧苯酮的SPE-HPLC-MS检测方法

张文娇1, 何远东2, 李鸣1, 姚于勤1, 史莹1   

  1. 1.四川大学华西公共卫生学院/华西第四医院,四川 成都 610041;
    2.成都市双流区第一人民医院医务科,四川 成都 610299
  • 收稿日期:2024-05-23 修回日期:2024-12-12 出版日期:2025-05-15 发布日期:2025-12-18
  • 通信作者: 史莹,讲师,E-mail:jennysing2013@163.com
  • 作者简介:张文娇,女,在读硕士研究生,研究方向为卫生理化检验。

Determination of oxybenzone in drinking water by SPE-HPLC-MS

ZHANG Wenjiao1, HE Yuandong2, LI Ming1, YAO Yuqin1, SHI Ying1   

  1. 1. West China School of Public Health,Sichuan University/West China Fourth Hospital,Chengdu,Sichuan 610041,China;
    2. Medical Department,Chengdu Shuangliu Districtthe First People's Hospital,Chengdu,Sichuan 610299,China
  • Received:2024-05-23 Revised:2024-12-12 Online:2025-05-15 Published:2025-12-18
  • Contact: SHI Ying,Lecturer,E-mail:jennysing2013@163.com

摘要: 目的 建立生活饮用水中氧苯酮残留检测的固相萃取-高效液相色谱-串联质谱法,并对实际生活饮用水中氧苯酮的残留进行检测。方法 采用固相萃取进行样品前处理,选用C18色谱柱、甲醇和超纯水作为流动相,二元高压梯度洗脱,多反应监测模式监测,电喷雾正离子模式测定,建立高效液相色谱-串联质谱法。结果 氧苯酮的线性范围为0.200~500 μg/L,回归方程为y=26 578x-4 882,r=0.998 8,相对标准偏差为3.44%,方法检出限为0.005 ng/L,定量限为0.017 ng/L,加标平均回收率为79.9%~101.0%。对成都市市内所采水样进行氧苯酮残留检测,均检测出残留,其平均浓度为6.43 ng/L。结论 建立的检测方法灵敏、快速,能够满足生活饮用水中氧苯酮残留量的检测工作要求,可为后续氧苯酮残留检测研究提供实验基础。

关键词: 氧苯酮, 生活饮用水, 固相萃取, 高效液相色谱-串联质谱法

Abstract: Objective To establish a solid phase extraction-high performance liquid chromatography-tandem mass spectrometry (SPE-HPLC-MS/MS) method for the determination of oxybenzone residues in domestic drinking water,and to detect the residual oxybenzoneinactual domestic drinking water. Methods HPLC-MS/MS method was established by using SPE for sample pretreatment,a C18 column,methanol and ultrapure water as the mobile phases,a binary high-pressure gradient elution,multi-reaction monitoringmode for monitoring,and electrospraying+mode for determining. Results The linear range of oxybenzone was 0.200-500 μg/L with the regression equation of y=26 578x-4882,r=0.998 8,the relative standard deviation was 3.44%,and the limits of detection of the method were 0.005 0 ng/L,the limits of quantification were 0.017 ng/L,and the recoveries of the spiked standards ranged from 79.9 to 101.0%. Oxybenzone residues were detected in water samples taken in Chengdu,with average concentration of 6.43 ng/L. Conclusion The established method is sensitive,rapid,and can meet the requirements for the detection of oxybenzone residue in drinking water,and can provide an experimental basis for the subsequent study of oxybenzone residue detection.

Key words: Oxybenzone, Drinking water, Solid phase extraction, High performance liquid chromatography-tandem mass spectrometry

中图分类号: